Video: Transform Your SI/PI Analysis with Clarity 3D Solver | Duration: 3032s | Summary: Transform Your SI/PI Analysis with Clarity 3D Solver | Chapters: Webinar Welcome Message (164.995s), Webinar Introduction and Overview (334.73s), Automation Extraction Workflows (526.755s), Clarity 3D Solver (611.675s), Automated Channel Extraction (858.78s), Clarity ACE Features (1096.665s), Advanced Analysis Features (1464.14s), Integration and Automation (1734.86s), Adaptive Meshing Challenges (2103.755s), Licensing and Integration (2260.125s), Python Automation Examples (2398.73s), RF Design Integration (2546.765s), Capacitor Model Reusability (2674.785s), Webinar Conclusion and Survey (2799.81s)
Transcript for "Transform Your SI/PI Analysis with Clarity 3D Solver":
Hello, everybody. We've got about a minute to go, and then we'll probably give everybody a couple to join the webinar, and we will probably start at about 01:02 or 01:03 as we see attendees continue to move into this. Hello, everybody. Thank you for your patience. We will get started in about two minutes with today's webinar. So just be patient, and in about two minutes, we'll get started. Hello, everybody. We'll give it about another one minute, and then we'll get started at 01:03. 01:03 East Coast time or 10:03 West Coast time. Had to do some quick math there. Alright, everybody. Hey. Welcome to today's webinar, transforming your SI and PI analysis with Clarity three d Solver. We'll begin in a little bit here, but on behalf of Cadence, I'd like to introduce, the topic. My name is Gary Lytle, and I'm the product manager responsible for electromagnetics projects products here at Cadence. And we will do a few things. So there's a few housekeeping things that we items we'd like to cover. First of all, all attendees have been muted so that prevent background noise. There'll be a question and answer segment at the end of today's webinar, and there's a pane in the right hand side if you want to in the engagement panel if you want to add questions and answers. We'll get to those questions once we finish the webinar. We will attempt to answer all the questions, but if we run out of time or need to have a deeper conversation, we'll take those offline, and we'll reach out to you via email within a few days. Please ask your questions, and so that we can queue them up and get ready to do them at the conclusion of today's webinar. Today's webinar is also being recorded. So at the end of the webinar, we will email you a link to the recording. You can share that recording with other colleagues that you think might have interest in the session, and we can share that with them. We're also going to be we'll be able to show you the slides and have conversations about that later. Before we get started, though, I also wanted to say next week is design con at the Santa Clara Convention Center. Cadence will be there at Booth 827. We've got a bunch of events happening on Wednesday and Thursday on the Show Floor, the networking event happening from four to six, also at the show. So come see us at the event. I'll be there in person. David will be there in person. And if you wanna have another conversation about this specific, technology, then we'd love to have a conversation there at design con. So I'm gonna hand things over to David. David is our group director for product engineering responsible for implementation and technology of all of our abilities within Clarity electromagnetics tool. And with that, David, please take it over. Clarity automated channel extraction. Thanks, Gary. So just to get started here, let's the the key discussion points here that we're gonna cover are, first off, Clarity FEM as a whole, what it is that Clarity does, just a brief intro of that. A big focus of this talk today is going to be the automated partitioning that we have within this new new tool called ACE. You may have a lot of questions after the fact. Please feel free to put those in the q and a. We're going to be also discussing how we do data reaggregation to get these results back into a workable view and to just post process them as a whole. And then pre and post processing, how that is dealt with within this tool, within this entire flow, and how this will help you. Okay? So specific topics here. We're going to be covering, of course, automation extraction workflows that as I said earlier, in the in introduction of Clarity as an FUM solver. This new tool that we're introducing called Clarity ACE or automated channel extraction. How can how you can do post processing in multiple multiple environments as well as some of the automations that we've already built that could be available to you depending upon which customer you are. Some how how the scripting interfaces interact, Python as a whole within this flow, and how this is all integrating with our implementation tools like Integrity three d IC, Virtuoso, Allegro, and a wrap up with question and answers. Okay. So within the Cadence ecosystem, we have many solvers. We have things like QantasRC. We have Clarity IE or Acxiom. We have the finite element solver that we'll be discussing today, which is Clarity. We also have a Clarity finite difference time domain solver. And as many of the participants here today know, you can't use the same solver for everything. However, we do see an increasing need for clarity, three d FEM, across many of our customers these days. So we'll be focusing mostly on that. If you do have questions about all the other solvers that we have, feel free to get in touch with us after the fact and and see what will truly solve your your your problems. Okay. So why do we always talk about Clarity three d Solver? I think it's a well known fact that we've been promoting Clarity quite a bit over the past five plus years. The the big difference here is that, you know, the the legacy solvers or the current solvers that we've been going up against are always constrained by some sort of compute resource, whether it's RAM limitations or or CPUs or whatever it is, and and the throughput required there for at least turnaround time, getting results and, you know, to be able to make an an engineering decision based on these types of simulations is becoming ever more, you know, more of a problem. So many customers in the past have been cutting down their their simulation model so that it would fit within these RAM limitations or be able to solve in their computers. We've been seeing that, you know, as people solve larger structures, they're also reducing the accuracy within these other tools so that they can fit it within their compute environment. So that's not a problem with Clarity. Also, the integration with implementation tools or CAD tools was lacking in the past, And, we're we're aiming to make these integrations much more seamless, as, as time goes on. Also, cloud computing, of course, has been a big topic, and, you know, Clarity is already known to be able to run on cloud environments. We do this all the time, and we actually have some cloud environments at Cadence that we can offer to our customers. K. In terms of accuracy, it's it's really what matters at the end of the day for making a proper engineering decision. Right? So within many of the the the papers that we've submitted to design con and other other con other conventions and whatnot, we have shown a number of times that clarity is not only meeting the the accuracy of other tools, but of measurements. And I think this is of importance to point out. Right? That we're at least in this twenty twenty twenty six design con, we'll be presenting a paper that shows accuracy up to 50 gigahertz. We have also done some studies with other customers that show that we cannot show here, but that show accuracy well beyond this range. So we're just we see that people are really seeing the accuracy of our solution even though we're doing what appears to be some sort of manipulation to make our solvers faster and whatnot. But I just want to assure you that Clarity is absolutely solving this in the correct way, and we're we're matching with measurements. K? Overall, we're seeing, of course, faster speed up of doing different types of designs, or or we're we're seeing a faster speed of our solver compared to other, other cost competitor tools. We see quite a lot of, designs such as, like, high speed packaging or even modules, interposers, high speed PCBs. We're we're seeing, you know, a lot of interest in IC level simulations as well, including enclosures and whatever else it is that people are trying to put into these arbitrary three d finite element solvers. We're compressing the design cycle. We're we're we're allowing people to get, these results as quickly as possible, given the clarity is just solving so much faster. And as we were stating earlier, it's, it's solving in less of a compute footprint. So you don't have to have those large, you know, two, three terabyte RAM machines anymore. We're partitioning the solve in such a way that it really does allow you to continue to use your existing compute architecture. So to start off the automation portion of this discussion, what we've typically been instructing our customers to do is you start with importing some sort of layout. And within Clarity, you could solve a specific net group with cutouts and whatever else very manually or even if it's automated. We didn't have a cohesive UI to perform all these net group cutouts and whatnot. So a customer at this time would likely be would likely be doing all of these partitionings completely manually. And then, of course, you have to take this into a post processing environment to do things like frequency domain comparisons or put masks and whatnot, do some sort of TDR simulation, maybe even run a full DDR type of SIM inside of topology workbench, and, create some sort of report. So this is just showing a high level data flow of what it is that, most of our customers are doing today. In Clarity ACE, we've we've compressed this significantly, to the point where you can assign multiple net groups and do multiple cutouts all at the same time and just serialize or parallelize this entire process. So as you can see from the the comparison between the slide before to this one, it's a it's more of a single step process rather than sitting around and and mucking around with different net groups and whatnot. This can all be reused as well from design to design. So if you do have any sort of respins and you need to gun go through this type of analysis again, it's simply a matter of importing certain files that, that will perform the simulation in the same fashion, but with a new layout. So that's where Clarity automated channel extraction comes into play. You can part do a very quick partitioning of your entire design. You can visualize all of the different partitions before you even solve. You can watch a solve progress. You can see results all through this interface, and you can be assured that we're going to be solving this with Clarity three d FEM accuracy with with all the benefits that Clarity already provides. So here's a view of the first window inside of Clarity ACE. What you would start with is a selection of of nets. If you start this off manually, you can select nets, put them into the second column, and push it into a partition or blocked as we're calling it in this case. So each partition is is a sub is a is a pretty much a JSON file with all the settings ready to go. You can crop this as well. So you're not losing the original design, but rather you're partitioning the original design into easily solvable pieces by performing just a series a small series of operations. This is, of course, a GUI for manual partition selection, but it could be done, as I mentioned earlier, by importing and exporting JSON files. Within here, you can do the cutting polygons and even set up ports from this first window. Moving on to the second window of this flow. From here, you can do things like set up your compute resources. There is a a way to set up parallel simulations as well, which means that instead of just solving these different blocks serially, you can tell the you can tell the tool how many different compute resources that you have and how many sols and licenses of Clarity you wanna pull at the same time in order to solve all of this in in a massive compute farm, for instance. Of course, as I mentioned earlier, you can do this across your existing LSF type farms, or you can do it on the cloud environment. It all depends on what you have access to. You can also set up the simulation options from this environment very easily. This includes anything that you're used to within Clarity if you're if you're already familiar with our tool. These include things like meshing options, geometry simplification, anything it is that is already available. Further, if you wanted to do some sort of stack up modifications using an external script or you wanted to do some extra detailed simulation modifications, things like setting up ports in a different way, setting up a different cutting polygon operations, anything in this event manipulates the geometry, you can add some sort of script in this in this view. From here, you can load, sorry, monitor your simulation progress. As you can see here, some of the simulations have already run. They've completed, as other ones are starting. Again, it's not completely serialized. It can also be parallelized, you can solve, let's say, two or three of these at the same time or even all of them at the same time if you have access to enough resources. From here also, you can load and plot results by going to the view results button here at the bottom. So why was this developed in the first place? Well, we saw that many of our customers were running into similar problems where, you know, they wanna use Clarity. They see the benefits of the solver in general, but they just wanted a a faster way to get to the end solution. There are many customers that partition the solve. They want way to partition it very, very intelligently and to do it quickly and repeatably. And to that end, we believe that this Clarity ACE tool will be very good for for doing all these operations very quickly and seamless seamlessly. And we're seeing that, of course, this speeds up the the turnaround time, not only in the individual solves, but the overall simulation time for solving all of these at the same time. And, of course, the the results from here can be taken into other tools that we have. So an existing flow that many may be aware of is we have a tool called Topology Workbench, which also encompasses SystemSI, SystemPI. These tools are pretty well known in the industry to to solve different problems. Right? So SystemSI does both serial and parallel post processing or, I I should say, frequency domain extraction, or it it does things like eye diagram displays or statistical analysis depending upon if it's a a parallel or serial type bus. So once you have your s parameters, the the traditional way is to just take that s parameter block, place it within some sort of diagram, submit that analysis job, and and and do quite a lot of setup to get this all running. We've already coupled with some other internal scripting interfaces to make this quite a bit easier as well and a little bit more automated. Depending upon the environment that you're starting from, this could be a completely automated process as well. And for instance, when we're working with Integrity three d IC, a lot of these these setup items to to generate some sort of eye diagram result are already done in the background to to create the schematic topology before running the simulation. So portions of this have already been have already been automated within certain workflows, but just letting you know that if you wanted to do this all manually or you wanted to script it, it's all possible to do from today. Large request that's been coming up more recently as speeds are getting a little faster is to be able to do what we call skew scan, which is really just looking at in intraper skew using some some methods that have been employed in different papers and whatnot. This is pretty much a face delay if you're coming from the RF world. In the signal integrity world, of course, we're we're always looking at skew between pairs and being able to really process through this quickly using a finite element solver rather than some sort of two and a half d solver or closed form equation has been ever more or increasingly important as speeds get higher and these margins are really dropping. So the ability to create a report directly from this that shows the skew numbers between these pairs is is becoming more important. So this is something that's that could be available to you depending upon, you know, depending upon the customer. We are we're allowing this type of analysis to be done also through Clarity Ace as a full automation, that you can then end up with a SKU scan report, after just a few inputs. Further, we have, a more configurable post processing environment, which, is called s ProView. This type of, automation also starts all the way back at Clarity Ace. You end up going, from, this environment to to go to Clarity Ace and create results that are then processed through, this s pro view. Sorry that I can't show the GUI of this at the moment, but, this is still under development to some extent. The way this works is that you would tell it what type of metrics you'd want to see at the end. Again, this is a different JSON file that allows you to configure the views of insertion loss, return loss, crosstalk, TDR, other things like PSNEXT, PSFEX, put in custom masks. And even as I mentioned in the last slide, you can get a SKU report as well. So this is all all configurable. These things will be available fairly soon here. And, of course, you end up with some sort of exported HTML report as we as we typically do from Cadence. Overall, we see we we've been seeing in the industry the push for Python to to control all of these things. We have full Python support these days. These we are actually pushing the Python as a preferred scripting method, from from here on. We will not be dropping support for Tickle for any any sort of, legacy code that's out there. We've been adding things like IDEs into the GUI so that it's easier to to to rewrite or to go through your code and and be able to highlight different items that are, you know, variables versus versus some sort of function call. This is all being done in at least the current version or maybe even 26 dot one. So if you haven't seen it within your environment, just know that we're we're working on making the the scripting portion of this quite a bit more powerful in the coming in the coming months. In the future as well, we have an integration with Versus Code Versus Code under test. In the background, there there are many different ways of doing this. So we're not necessarily exposing that at this time because we're still making some decisions on this. But the ability to run through any sort of Python scripting within our tool from Versus will be allowed very soon here. There's a number of other requests that we've been seeing, including creation of custom GUIs and whatever else it is within our environment. We're allowing that as well. So just if you're if you're wondering about where this is all going in the future, please contact us, and we can talk to you about more details. Now as Cadence is a very large company, we have a number of tools that we've been, we've been developing for different flows. The Integrity three d IC platform is one of these, one of these higher level integration platforms, that controls implementation and database management, from a very high level. This will, enable you to do things like floor planning, deal with digital design, deal with RF and analog design, be able to integrate your package and PCB designs altogether within this entire platform called Integrity three d IC. If if you're interested in in understanding how we do database management through Integrity three d IC, please get in touch with us. This is, I think, becoming a very large topic as we start moving into things like chiplets and and HBM and all these interposer designs that are that are coming or that are already in the market, I should say. And being able to solve directly into all of our multiphysics system analysis tools like Clarity, Celsius, whatever it is. These are, all directly able to be accessed from a tool like Integrity three d IC. And just to, you know, bring this point back home, Clarity Ace in many of these workflows is being employed in the background. So as you start getting into some of these workflows, you'll see that we're using Clarity Ace to automate quite a lot of these these simulations as you know, for instance, you can't solve a thousand lines of HBM all at once. We've been using Clarity ACE to to partition the solve and give you results in a very fast manner. Similarly, when it comes to Virtuoso, we've been integrating quite a bit with with this environment so that you can take, let's say, like, a layout in a module view. This is a on the left side, we're showing a system centric and module centric view, meaning that we have multiple fabrics that are already imported into the virtual environment. This, for instance, is a is a package module with ICs sitting on top of it. From this environment, we've done, employed many of the techniques talked about today to run things like clarity in the background. You can also solve EMX directly and even Celsius for that matter directly from the virtual sort of environment. But just showing you that the the amount of automation integration that we're going after here is not limited to just solve using these tools in a a in a silo. And, from Allegro, which is a PCB and package design environment, we've been, integrating a lot of these, more, I'd say, focused workflows or focused portions of our tools into the Allegro environment. Clarity ACE will be available from the Allegro environment as well in the coming years. So what this really allows you to do is from Allegro, you can run any of these different analysis workflows. And depending upon your your focus, you can either do things like IR drop, you can see impedance, You can see coupling. And this goes all the way the results will be available directly in the Allegro Canvas similarly to the other tools that we just said, you know, things like their integrity three d IC and Virtuoso. The the results are always pulled, back from the analysis tool into the environment that you're working in so that you can quickly see the results and even, in this case, overlay the results directly on the canvas if you if it's the type of result that can do that. And so that's that's pretty much it here. Overall, I think what we're what we're talking about here today is doing a fast or or cutting down your setup and and post processing time using tools like Clariatase and some of the other integrations and and tools that we've been developing over the the years to make your analysis much faster, much more integrated, much more seamless. And, yeah, I'd say let's open this up to some questions at this time. Fantastic. So, David, great job presenting Clarity Ace. We've got a few questions, and I'll I'll be your host today again. Gary Lytle hosting the questions. So I can answer this one. It's from will the Ace feature be included in the existing Clarity, or will it require an additional license? This will not require an additional license. You obviously have to have the core licenses and the accelerator licenses necessary to cover however many parallel runs you wanna run, but we won't be licensing this as a separate line item. It'll be just included in the Clarity licensing. Like I said, if you wanna run 32 licenses in parallel, then you'll need, you know, enough licenses to cover 32 cores in parallel. If you wanna run a 150 licenses or a 100 a 150,000 cores, you'll just need licenses to cover that amount of consumption. That's it. Okay. So I got a couple more questions, and this one's a long one. So I'm gonna read it from the from the text here, David. At 400 g PAM four speeds, we are relying heavily on embedded silicon capacitors for frequencies up to a 120 gigahertz. This creates a massive scale disparity. We need to accurately mesh dial micrometer dial level tilt specific stencil cutouts and ultrathin conformal dielectrics all within full package layout. How does Clarity's adaptive meshing handle this extreme aspect ratio without producing degraded tetrahedra or exploding the node count? That's a lot. Yeah. That's quite a bit. And before say you before you answer that, I'll give you an opportunity to think for a second, David. okay. I just wanted to say, you know, the project that David had showed earlier was the 50 gigahertz Wild River project, but we've expanded that to 70 gigahertz last year. And this year, we plan on we're in the process right now of expanding that for next year's design con up to a 110 gigahertz accurate measurement to simulation correlation study. So, David, go ahead. Yeah. So from from the perspective of just clarity rather than focusing on the ACE portion of this since that's it seems like it's asking a question or the person is asking a question more about the capabilities of Clarity. We've been using Clarity for things on chip quite a bit through Virtuoso as well as Integrity three d I c or Innovus. And we've seen, of course, that we have to do sometimes localized meshing and that kind of thing. In terms of aspect ratio, we can we've been successful in either you know, you can do, of course, two d approximations for some of these, you know, using impedance boundary conditions and whatnot. But we've been pretty successful with our meshing team to solve very, very dense mesh in localized areas and and use more of a a loose mesh in other areas. So we haven't seen too many limitations. A lot of the time in the past, it was about a limitation in the the mesh count itself. But Clarity can handle very, very large mesh count. We've been seeing all the way up into the, hundreds of millions of of elements. And so it's a it's a matter of being able to place enough dense mesh in the area that you're that you're focusing on, and Clarity is able to do that. So I'd say that if you are concerned about this or you would like to try it, yeah, definitely get in touch with us, and we can run through your design and make sure that we can we can solve that problem. David, I think we opened the floodgates on questions because they're starting to pour in. That's fantastic. Yeah. Same question got asked about a separate license for Clarity Ace. I just wanna make sure you if you heard that, the answer is no. You will not need a separate license. You'll just need the licenses to run the course that that you desire to run-in parallel. So the should be released. It's already in under environment variable in the existing flow out there. So and the existing product out there. So if you have an older version of Clarity, there it it is a you're able to use it, and you can reach out to any of us. My name my email is just gary@cadence.com. You can reach out to me. We can get in touch with your account team, and they can get you a license to access it because it was protected under license in previous versions. But in this release, is hotfix two coming out in April time frame, there shouldn't be any licensing required, and it should be all ready to go in in this version. Oh, here's a good question. Do you need to so we don't need to redo all the setups again. I'm assuming for all the different different. Yeah. subdomain. Yeah. Sorry. If I didn't make that clear earlier, yeah. The you can save the setup, and you can bring in either, of course, the same layout or a modified layout, which, which has at least the same pin names and net names so that we can recreate the all these partitions with a new layout. So it's driven by net groups for the most part, and we we are creating compo ports on components. So, yeah, this is a absolutely repeatable or reusable setup. Another question is, can we seamlessly switch between eMX and Virtuoso or eMX and Clarity in Virtuoso? That's a good one. So, of course, there's always the detail of proc files and EM proc files and whatnot. But as long as those are set up nicely, in the coming future, it's gonna be right around q two, q three time frame. We're gonna have the ability to easily switch between EMX and Clarity inside of Virtuoso. Yes. She's I got more. Can we do co simulation of die package PCB EM simulations with clarity? I think you kind of answered that already, but Yeah. Depending upon the environment that you're starting from, either we we build it up for you from that implementation platform, or we have a a number of ways of, of combining these, these different fabrics together within the same simulation. Of course, the most manual method would be within a full three d environment, but we do have a number of environments that allow you to assemble this very easily using, you know, things like pin names or maybe even PLOC files or whatever it is that you have access to to align these objects together. We've been working with quite a number of customers on automating that process. Perfect. Here's another one, and we'll do a couple more questions, and then we can we can we'll probably wrap this up a little bit early. So so if I don't get to your question, I'll get a report and then we'll we'll call you or email you and reach out to you later because they're kind of flying through. There's a lot of there's a lot of great questions, so I'm working on it. Yeah. When is it possible to see examples for the python for Python? Examples. Okay. Well, there's a there's a number of examples that are built into our tools already. They may not be easily or they they may not be apparent or easily found within our tools, but we we absolutely have some examples that sit inside of our tools. For more complex examples, I would say reach out to your AEs. We do have quite a lot of AEs that are dedicated to automation. And either you can work with us directly, or I know that if the question is, is our documentation up to snuff, we are working on that quite a bit. At this time, we do have a lot of our Python scripting classes and whatnot and nodes, at least described. But, yeah, we we have to work on that just a bit more. But we do see that there's gonna be a huge uptick in Python utilization within the coming years, so we're working on that heavily. Okay. Here's a here's a couple more. How to learn RF design or how to I think that means how to learn RF designers who are not responsible for the entire design or the entire IC or package or PCB, but only the RF portion inside of them. How can they start using Clarity and be comfortable to run it? Not responsible for the entire okay. Sorry to include instead of the tools. I don't think I completely get the question. I think you're just asking how they I mean, if I think this the short answer is reach out to you can reach out to me or reach out to your application engineering team if you're not responsible for the whole thing, but portions of it, you know, we can work with your team or you and other people in your macro team that can help you get whatever data you need to be able to ensure that you can run simulations from the design platforms. If that's if you're asking about getting design platform data that you're not responsible for but have to integrate with, I think we can help with that communication between different groups in your organization, especially if they're using cadence design tools. I mean, that's the big value differentiation between what cadence offers in simulation and design versus what other people, offer in what I would call a Frankenflow where you have to pass data manually between the tools yourself. Yeah. And so, go, ahead. an implied question here. Right? Do we support do we support in, importing different layout tools, I guess, source data into our environment? And that's that's a yes right there. Right? We work we work with, all kinds of data, anything that's in the industry. Right? So if you have o d b plus plus, IPC twenty five eighty one, GDS, something from Virtuoso, something from Innovus, from pretty much any tool out there. So, yeah, we we definitely help people import all that type of data and combine them together and run some sort of simulation on the entire thing. We do that all the time. Here's. another question. Yeah. I got a few more. I think we're gonna I'm gonna give it till because there's still a lot of questions. 01:45, and then we'll wrap it up because we can continue to do this all day, I bet. Can. Aurora use the Clarity Solver? Absolutely. And it's gonna continue to get better. At this time, we have kinda limited it to certain flows. But, yeah, again, talk to your AEs, talk to any of us regarding what is available today and what will be more integrated in the future. We're we're absolutely understanding that people are trying to do more and more from these in implementation platforms, and we are trying to expand this use model quite a bit more. So, there are either things that are currently available or really coming close to being, down available to customers here soon. So, yeah, keep your ears open and talk to us as much as you can. Last one more question. How can I or can I reuse capacitor models between files? This is a pretty huge question. Yeah. The the short answer is yes. We do this in quite a different quite a number of ways. To kind of answer this in a bigger way, we are partnered with a lot of component vendors with three component models as well. So if you're able to get come these three component models directly from your vendors or if it's s parameter or if it's just general spice, all of these can be reused and placed even if it's even a three d component directly into our canvas and and used either for a full three d simulation or just be treated as spice sub spice subset or sorry, spice netlist for for circuit. I I guess you could say it's integrated in many different ways. So, yeah, you can absolutely reuse cap cap capacitor models in a number of ways. Okay. Fantastic. We've got a few one more thing. So first of all, thanks everybody for attending the webinar. You'll get the recording in a in a short amount of time. And and if the slides needed or we can talk to to you about what's what was the material of the presentation. Keep in mind, if you're gonna if you're in the San Jose area next week for design con, we'll be there at Booth 827. Again, Thursday, we have a four to six happy hour networking session with about 12 experts from both industry and from Cadence that are available for you to talk with. And David will be there as one of these people floating around, and he'll be at our booth. We also are are pretty excited about some of the events that we're having throughout the day, those two days. So make sure you come see us at design con at Booth 827. I'm gonna hand things over to Kale. He's got one more thing to cover to wrap things up, and then we'll get everything out to everybody. Have a great day. Thanks, Gary. Thanks, David. Hey. I just launched a survey for everyone. It's a real quick four question survey. It'll take you fifteen seconds at most. If you wouldn't mind filling that out and let us know how we did today, that'd be great. And there's some, you know, fields in there if you needed to type something in. If you wanted to follow-up on something specific, you can also put it in that survey as well. So we really appreciate you guys, joining us today, and, we hope you got a lot out of it. It's a great presentation, and I hope to see you soon. Thank you so much.